Fixturlaser SMC

Fixturlaser SMC – 기계 고장 자동 진단

 

FIXTURLASER SMC는 기계 기술자 또는 유지보수 기술자가 필요에 따라 몇 분 만에 회전 기계의 상태를 확인할 수 있는 휴대용 기계 진단 도구입니다. 특별한 교육이나 인증이 필요하지 않으며 신뢰도와 심각도 수준이 모두 포함 된 간단하고 명료한 기계 진단 보고서를 생성할 수 있습니다.

간단한 3 단계로 빠르고 정확한 기계 진단

  • 장치에서 진단 할 기계를 선택하십시오.  
  • 자동으로 지정된 각 포인트에서 측정합니다.
  • 기계 진단 보고서를 보고 무엇이 잘못되고 무엇이 수정 되어야 하는지 알아보십시오.
FIXTURLASER SMC EX
FIXTURLASER SMC는 EX 방폭용 시스템으로도 제공됩니다. 
방폭기준: EX – ATEX Zone II 3 G Ex ic IIC T4Gc( 가스, 연기 또는 안개 형태의 가연성 물질과 공기의 혼합물로 구성된 폭발성 대기가 정상 작동 중에 때때로 형성 될 가능성이 있는 산업. 광산 제외.) 방폭 버전도 FIXTURLASER SMC와 동일한 성능 및 기능을 가지고 있습니다.

Accurex ™-자동 기계 진단 

FIXTURLASER SMC 고유의 자동 기계 진단 알고리즘 Accurex ™는 FIXTURLASER SMC에 내장되어 있습니다. 혁신적인 기계 진단 기능으로 불균형, 정렬 오류, 캐비테이션, 구조 공진, 베어링 문제 등과 같은 광범위한 기계 문제에 대해 빠르고 관련성이 높으며 신뢰할 수 있는 결과를 제공합니다.  FIXTURLASER SMC 기계 진단 기능은 다른 어떤 시스템과도 비교가 되지 않습니다.

내장 스트로보 스코프

내장된 스트로보 스코프를 사용하면 정확한 진단을 보장하는데 중요한 RPM을 쉽게 찾을 수 있습니다.

디지탈 카메라 내장 

디지탈 카메라가 내장되어 있어 기계 식별을 위하여 사용할 수도 있고, 센서부착 위치를 선정 또는 기록등, 그리고 보고서를 위하여 일러스트레이션용으로 다양하게 활용할 수 있다.

3축 무선센서

내장된 스트로보 스코프를 사용하면 정확한 진단을 보장하는데 중요한 RPM을 쉽게 찾을 수 있습니다.

레이져 온도계 내장

FIXTURLASER SMC에는 진단을 확인하기 위해 기계의 온도를 쉽게 측정 할 수 있는 레이저 온도계가 내장되어 있습니다.

밸런싱 키트 옵션(액세서리)

SMC Balancer는 강력한 밸런싱 측정 도구입니다. 스마트하고 사용하기 쉽습니다. FIXTURLASER SMC Balancer는 프로세스 전반에 걸쳐 사용자를 안내하고 모든 계산을 자동화합니다. 사용자는 사용자 친화적인 시각적 인터페이스를 통해 기계를 정의하고, 스피드 카운터를 구성하고, 테스트 웨이트 등을 선택합니다. 측정 절차에 따라 SMC는 올바른 보정 웨이트를 계산해 줍니다.

FIXTURLASER SMC Balancer는 1 면 또는 2 면으로 밸런싱 작업을 수행합니다.

 WHAT’S IN THE CASE?

FIXTURLASER SMC

FIXTURLASER SMC – Package with Case

FIXTURLASER SMC display unit
FIXTURLASER SMC sensor
USB cable for the wireless sensor (power supply)
6 pcs of adapters
FIXTURLASER SMC power supply
Wireless sensor power supply
Universal tool

FIXTURLASER SMC PACKAGE*

Touchscreen

Graphic color touchscreen
Resolution: 800 x 480 pixels 
Dimension: 154 x 92 mm (D7”)
Adjustable brightness 
Can be used outdoors
Icon functions

Touch keyboard

On touchscreen:

  • 10 contextual function keys
  • Functions are organized for single-hand measurement (left or right)
  • Direct access to general functions: Home, Help, Setup, Screen copy, Picture, Bar code reader, Text note, Audio comment, Pyrometer, Stroboscope
  • Full keyboard for text input. Several keyboards are available: qwerty, azerty, Chinese…

Acquisition 

Synchronous on 4 channels + trigger input
24-bits conversion
Sampling frequency: 

  • 102.4 kHz for each channel
  • Up to 204.8 kHz on 1 channel

Antialiasing filter
Wireless acquisition with FIXTURLASER SMC WLS triaxial accelerometer 
Digital signal processors
Real-time processing: 

  • 40 kHz on 4 channels
  • Up to 80 kHz on 2 channels

Memory: 3.5 GB for measurements 

Communication 

USB 2 type B device (direct connection to PC)
USB 2 type A host (for USB stick)
Ethernet
Wi-Fi

Battery

Autotest and calibration function
High-density Li-Ion type 
Rechargeable without removing
Battery lifetime: 10 hours under intense use
Programmable automatic standby mode and switch-off 

Analog Inputs

Up to 4 programmable signal inputs (depending on instrument option):

  • Frequency range: 0 – 40 kHz on 4 channels, 80 kHz on 1 channel 
  • Overload indicator in % with memorization
  • IEPE interface with real-time integrity control, range ± 8V (power supply: 4 mA constant current 23 VDC)
  • Dynamic signal measurements (acceleration, vibration velocity, absolute displacement, relative displacement, electrical current, etc.)
    • +/- 10 VAC
    • 0, -24 V for proximity probes (a -24Vdc power supply is available on each channel)
  • Input impedance AC/DC: 100 kΩ
  • Accuracy: +/- 1% 
  • Sensors without electronics with an optional charge amplifier
  • DC input: from -24 VDC to +24 VDC for measurements of position and process parameters
  • AC coupling: 0.3 Hz
  • Compatible with triaxial sensor

Trigger input:

Range: +/- 10 V, 0 to +24 V, 0 to – 24 V
Adjustable triggering parameters
Automatic setup function
For rotation speed measurement, synchronous analysis, balancing, order analysis. 
Input impedance: 100 kΩ
+ 5 Vdc power supply for tacho probe
-24 Vdc power supply for proximity probes

Microphone input 

Microphone input for audio inspection notes

Analog OUTPUTS

1 headphone output to listen sensor signal, recorded signal or audio inspection notes
1 stroboscope output: TTL
For each channel and trigger input: 
-24 Vdc power supply for proximity probe

BUILT-IN PYROMETER WITH LASER-SIGHTING  

Contactless temperature measurement:

  • Range: 0 to 200°C
  • Accuracy: +/- 3°C for ambient temperature ranging from 18°C to 28°C.
  • Resolution: 0.5°C
  • Repeatability: +/- 1°C
  • Field of view: 5° @ 50%
    (∅ target ≃ 4 cm @ 50 cm)
  • Time response: 1 s
  • Fixed emissivity: 95%

BUILT-IN STROBOSCOPE

Rotation speed measurement:

  • Range: 30 to 15000 RPM
  • Automatic setting to machine speed predefined in setup
  • Adjustment:
    • ½, x2
    • Fast
    • Fine
  • Flash duration: adjustable from 0.5 to 15°
  • Can be used independently or to adjust rotation speed in a route or from a spectrum display

Built-in camera

Resolution: 640 x 480
Autofocus
Distance: 20 cm to ∞
Flash mode 

Identification of measurement point

Built-in bar code reader 
Reading distance: from 20 cm to 50 cm according to the code dimension
Bar code format: QRcode
Learning mode to avoid codes manual input

Mechanical/environment

Protection: IP65. 
Case with shock protection rubber 
Shock protection: 1.2 m drop  (1 m for EX version)
Standard compliance:  

  • Safety: IEC61010-1
  • EMC: directive 2004-108-CE 

Dimensions: 200 x 265 x 65 mm
Weight: 1.8 kg including battery and rubber protection
Operating temperature: -10°C to 55°C
Humidity: 95% no condensation

FIXTURLASER SMC-EX, intrinsically safe version: 

ATEX  certification: EX II 3 G, EEx ic IIC T4 supplied with certified accessories.
IECEX certification (pending)

Note: shock protection: 1 m drop. The protection screen accessory cannot be used in dangerous areas and is not supplied.

 

Remote access

The FIXTURLASER SMC can be set up so as to communicate with your network through its Ethernet or Wi-Fi interface and used as a remote station. You can then use the applications installed on your computer directly from the FIXTURLASER SMC (SUPERVISION, CMMS…).

*Note! Specifications are preliminary and subject to change without notice.

Accessories

SMC Balancer Upgrade kit

Wired triaxial sensor kit

 

Fixturlaser SMC Balancer/also available in ex version

An upgrade kith with laser tachometer with cable for connection on channel C, supplied with a 5m extension cable.
USB cable for connecting the Fixturlaser SMC to a computer (reports)
Magnet holder 2 ASH accelerometers, 2 straight cables for ASH, 2 high-power magnets for ASH.

FIXTURLASER SMC Balancer is also available as EX system EX – ATEX Zone II 3 G Ex ic IIC T4Gc, with the same performance and capabilities as the regular FIXTURLASER SMC Balancer (ZONE II Industry where explosive atmosphere, consisting of a mixture of air and combustible material in the form of gases, smoke or fog, is likely to be formed sometimes during normal operation. Mines excluded.

Wired triaxial sensor kit

Also available in an EX version.

Audio adapter

Also available in an EX version.

  

관련상품 바로가기